module axis_utils_mod
  !
  !<CONTACT EMAIL="GFDL.Climate.Model.Info@noaa.gov">M.J. Harrison</CONTACT>
  !
  !<REVIEWER EMAIL="GFDL.Climate.Model.Info@noaa.gov">Bruce Wyman</REVIEWER>
  !

  !<OVERVIEW>
  ! A set of utilities for manipulating axes and extracting axis
  ! attributes
  !</OVERVIEW>

  !<DESCRIPTION>
  !
  ! subroutine get_axis_cart(axis,cart) : Returns X,Y,Z or T cartesian attribute
  ! subroutine get_axis_bounds(axis,axis_bound,axes) : Return axis_bound either from an array of 
  !                                                    available axes, or defined based on axis mid-points
  ! function get_axis_modulo : Returns true if axis has the modulo attribute
  ! function get_axis_fold   : Returns is axis is folded at a boundary (non-standard meta-data)
  ! function lon_in_range    : Returns lon_strt <= longitude <= lon_strt+360
  ! subroutine tranlon       : Returns monotonic array of longitudes s.t., lon_strt <= lon(:) <= lon_strt+360.
  ! subroutine nearest_index : Return index of nearest point along axis
  !
  !</DESCRIPTION>
  !

  use mpp_io_mod, only: axistype, atttype, default_axis, default_att,         &
                        mpp_get_atts, mpp_get_axis_data, mpp_modify_meta,     &
                        mpp_get_att_name, mpp_get_att_type, mpp_get_att_char, &
                        mpp_get_att_length
  use mpp_mod,    only: mpp_error, FATAL, stdout
  use fms_mod,    only: lowercase, string_array_index  

  implicit none

# include <netcdf.inc>

  public get_axis_cart, get_axis_bounds, get_axis_modulo, get_axis_fold, lon_in_range, &
         tranlon, frac_index, nearest_index, interp_1d, get_axis_modulo_times

  private

  integer, parameter :: maxatts = 100
  real, parameter    :: epsln= 1.e-10
  real, parameter    :: fp5 = 0.5, f360 = 360.0
  character(len=256) :: version = '$Id: axis_utils.F90,v 1.1.1.2 2012-11-16 16:00:09 atrayano Exp $'
  character(len=256) :: tagname = '$Name: Heracles-2_0 $'   

  interface interp_1d
     module procedure interp_1d_1d
     module procedure interp_1d_2d
     module procedure interp_1d_3d
  end interface

contains


  subroutine get_axis_cart(axis, cart)      

    type(axistype), intent(in) :: axis
    character(len=1), intent(out) :: cart
    character(len=1) :: axis_cart
    character(len=16), dimension(2) :: lon_names, lat_names
    character(len=16), dimension(3) :: z_names
    character(len=16), dimension(2) :: t_names
    character(len=16), dimension(3) :: lon_units, lat_units
    character(len=8) , dimension(4) :: z_units
    character(len=3) , dimension(6) :: t_units
    character(len=32) :: name
    integer :: i,j

    lon_names = (/'lon','x  '/)
    lat_names = (/'lat','y  '/)
    z_names = (/'depth ','height','z     '/)
    t_names = (/'time','t   '/)
    lon_units = (/'degrees_e   ', 'degrees_east', 'degreese    '/)
    lat_units = (/'degrees_n    ', 'degrees_north', 'degreesn     '/)
    z_units = (/'cm ','m  ','pa ','hpa'/)
    t_units = (/'sec', 'min','hou','day','mon','yea'/)

    call mpp_get_atts(axis,cartesian=axis_cart)
    cart = 'N'

    if ( lowercase(axis_cart) == 'x' ) cart = 'X'
    if ( lowercase(axis_cart) == 'y' ) cart = 'Y'
    if ( lowercase(axis_cart) == 'z' ) cart = 'Z'
    if ( lowercase(axis_cart) == 't' ) cart = 'T'

    if (cart /= 'X' .and. cart /= 'Y' .and. cart /= 'Z' .and. cart /= 'T') then
       call mpp_get_atts(axis,name=name)
       name = lowercase(name)
       do i=1,size(lon_names(:))
          if (trim(name(1:3)) == trim(lon_names(i))) cart = 'X'
       enddo
       do i=1,size(lat_names(:))
          if (trim(name(1:3)) == trim(lat_names(i))) cart = 'Y'
       enddo
       do i=1,size(z_names(:))
          if (trim(name) == trim(z_names(i))) cart = 'Z'
       enddo
       do i=1,size(t_names(:))
          if (trim(name) == t_names(i)) cart = 'T'
       enddo
    end if

    if (cart /= 'X' .and. cart /= 'Y' .and. cart /= 'Z' .and. cart /= 'T') then
       call mpp_get_atts(axis,units=name)
       name = lowercase(name)
       do i=1,size(lon_units(:))
          if (trim(name) == trim(lon_units(i))) cart = 'X'
       enddo
       do i=1,size(lat_units(:))
          if (trim(name) == trim(lat_units(i))) cart = 'Y'
       enddo
       do i=1,size(z_units(:))
          if (trim(name) == trim(z_units(i))) cart = 'Z'
       enddo
       do i=1,size(t_units(:))
          if (name(1:3) == trim(t_units(i))) cart = 'T'
       enddo
    end if

    return

  end subroutine get_axis_cart


  subroutine get_axis_bounds(axis,axis_bound,axes)

    type(axistype), intent(in) :: axis
    type(axistype), intent(inout) :: axis_bound
    type(axistype), intent(in), dimension(:) :: axes

    type(atttype), dimension(:), allocatable :: att
    real, dimension(:), allocatable :: data, tmp

    integer :: i, len
    character(len=128) :: bounds_name = 'none', name, units
    character(len=256) :: longname
    character(len=1) :: cartesian

    axis_bound = default_axis
    allocate(att(maxatts))
    att = default_att
    call mpp_get_atts(axis,atts=att)

    do i=1,maxatts
       if (mpp_get_att_type(att(i)) == NF_CHAR) then
          !            if (str_contains(att(i)%name,'bounds') .or. str_contains(att(i)%name,'edge')) then
          if (string_array_index('bounds',(/mpp_get_att_name(att(i))/)) .or. &
              string_array_index('edge',(/mpp_get_att_name(att(i))/))) then
             bounds_name = mpp_get_att_char(att(i))
          endif
       endif
    enddo

    if (trim(bounds_name) /= 'none') then
       do i=1,size(axes(:))
          call mpp_get_atts(axes(i),name=name)
          if (lowercase(trim(name)) == lowercase(trim(bounds_name))) then
             axis_bound = axes(i)
          endif
       enddo
       call mpp_get_atts(axis_bound,len=len)
       if (len < 1) call mpp_error(FATAL,'error locating boundary axis for '//bounds_name)
    else
       call mpp_get_atts(axis,name=name,units=units,longname=longname,&
            cartesian=cartesian,len=len)
       name = trim(name)//'_bounds'
       longname = trim(longname)//' bounds'
       allocate(tmp(len))
       call mpp_get_axis_data(axis,tmp)
       allocate(data(len+1))
       do i=2,len
          data(i)= tmp(i-1)+fp5*(tmp(i)-tmp(i-1))
       enddo
       data(1)= tmp(1)- fp5*(tmp(2)-tmp(1))
       if (abs(data(1)) < epsln) data(1) = 0.0
       data(len+1)= tmp(len)+ fp5*(tmp(len)-tmp(len-1))         
       if (data(1) == 0.0) then
          if (abs(data(len+1)-360.) > epsln) data(len+1)=360.0
       endif
       call mpp_modify_meta(axis_bound,name=name,units=units,longname=&
            longname,cartesian=cartesian,data=data)
       deallocate(tmp)
       deallocate(data)
    endif

    return
  end subroutine get_axis_bounds

  function get_axis_modulo(axis)

    type(axistype) :: axis
    logical :: get_axis_modulo
    integer :: natt, i
    type(atttype), dimension(:), allocatable :: atts


    call mpp_get_atts(axis,natts=natt)
    allocate(atts(natt))
    call mpp_get_atts(axis,atts=atts)

    get_axis_modulo=.false.
    do i = 1,natt
       if (lowercase(trim(mpp_get_att_name(atts(i)))) == 'modulo') get_axis_modulo = .true.
    enddo

    deallocate(atts)

    return
  end function get_axis_modulo

  function get_axis_modulo_times(axis, tbeg, tend)

    logical :: get_axis_modulo_times
    type(axistype), intent(in) :: axis
    character(len=*), intent(out) :: tbeg, tend
    integer :: natt, i
    type(atttype), dimension(:), allocatable :: atts
    logical :: found_tbeg, found_tend
    
    call mpp_get_atts(axis,natts=natt)
    allocate(atts(natt))
    call mpp_get_atts(axis,atts=atts)
  
    found_tbeg = .false.
    found_tend = .false.

    do i = 1,natt
      if(lowercase(trim(mpp_get_att_name(atts(i)))) == 'modulo_beg') then
        if(mpp_get_att_length(atts(i)) > len(tbeg)) then
          call mpp_error(FATAL,'error in get: len(tbeg) too small to hold attribute')
        endif
        tbeg = trim(mpp_get_att_char(atts(i)))
        found_tbeg = .true.
      endif
      if(lowercase(trim(mpp_get_att_name(atts(i)))) == 'modulo_end') then
        if(mpp_get_att_length(atts(i)) > len(tend)) then
          call mpp_error(FATAL,'error in get: len(tend) too small to hold attribute')
        endif
        tend = trim(mpp_get_att_char(atts(i)))
        found_tend = .true.
      endif
    enddo

    if(found_tbeg .and. .not.found_tend) then
      call mpp_error(FATAL,'error in get: Found modulo_beg but not modulo_end')
    endif
    if(.not.found_tbeg .and. found_tend) then
      call mpp_error(FATAL,'error in get: Found modulo_end but not modulo_beg')
    endif

    get_axis_modulo_times = found_tbeg 

  end function get_axis_modulo_times

  function get_axis_fold(axis)

    type(axistype) :: axis
    logical :: get_axis_fold
    integer :: natt, i
    type(atttype), dimension(:), allocatable :: atts


    call mpp_get_atts(axis,natts=natt)
    allocate(atts(natt))
    call mpp_get_atts(axis,atts=atts)

    get_axis_fold=.false.
    do i = 1,natt
       if (mpp_get_att_char(atts(i)) == 'fold_top') get_axis_fold = .true.
    enddo

    deallocate(atts)

    return
  end function get_axis_fold

  function lon_in_range(lon, l_strt)
    real :: lon, l_strt, lon_in_range, l_end

    lon_in_range = lon
    l_end = l_strt+360.

    if (abs(lon_in_range - l_strt) < 1.e-4) then
       lon_in_range = l_strt
       return
    endif

    if (abs(lon_in_range - l_end) < 1.e-4) then
       lon_in_range = l_strt
       return
    endif

    do
       if (lon_in_range < l_strt) then          
          lon_in_range = lon_in_range +  f360;
       else if (lon_in_range  >  l_end) then
          lon_in_range  = lon_in_range - f360;
       else
          exit
       end if
    end do

  end function lon_in_range

  subroutine tranlon(lon, lon_start, istrt)

    ! returns array of longitudes s.t.  lon_strt <= lon < lon_strt+360.
    ! also, the first istrt-1 entries are moved to the end of the array
    !
    ! e.g.
    !        lon =      0 1 2 3 4 5  ...  358 359; lon_strt = 3 ==>
    !        tranlon =  3 4 5 6 7 8  ...  359 360 361 362; istrt = 4

    real, intent(inout), dimension(:) :: lon
    real, intent(in) :: lon_start
    integer, intent(out) :: istrt


    integer :: len, i
    real :: lon_strt, tmp(size(lon(:))-1)

    len = size(lon(:))

    do i=1,len
       lon(i) = lon_in_range(lon(i),lon_start)
    enddo

    istrt=0
    do i=1,len-1
       if (lon(i+1) < lon(i)) then
          istrt=i+1 
          exit
       endif
    enddo

    if (istrt>1) then ! grid is not monotonic
       if (abs(lon(len)-lon(1)) < epsln) then 
          tmp = cshift(lon(1:len-1),istrt-1)
          lon(1:len-1) = tmp
          lon(len) = lon(1)
       else
          lon = cshift(lon,istrt-1)
       endif
       lon_strt = lon(1)
       do i=2,len+1
          lon(i) = lon_in_range(lon(i),lon_strt)
          lon_strt = lon(i)
       enddo
    endif

    return
  end subroutine tranlon

  function frac_index (value, array)
    !=======================================================================
    !
    !     nearest_index = index of nearest data point within "array" corresponding to
    !            "value".
    !
    !     inputs:
    !
    !     value  = arbitrary data...same units as elements in "array"
    !     array  = array of data points  (must be monotonically increasing)
    !
    !     output:
    !
    !     nearest_index =  index of nearest data point to "value"
    !             if "value" is outside the domain of "array" then nearest_index = 1
    !             or "ia" depending on whether array(1) or array(ia) is
    !             closest to "value"
    !
    !             note: if "array" is dimensioned array(0:ia) in the calling
    !                   program, then the returned index should be reduced
    !                   by one to account for the zero base.
    !
    !     example:
    !
    !     let model depths be defined by the following:
    !     parameter (km=5)
    !     dimension z(km)
    !     data z /5.0, 10.0, 50.0, 100.0, 250.0/
    !
    !     k1 = nearest_index (12.5, z, km)
    !     k2 = nearest_index (0.0, z, km)
    !
    !     k1 would be set to 2, and k2 would be set to 1 so that
    !     z(k1) would be the nearest data point to 12.5 and z(k2) would
    !     be the nearest data point to 0.0
    !
    !=======================================================================

    integer :: ia, i, ii, unit
    real :: value, frac_index
    real, dimension(:) :: array
    logical keep_going
    
    ia = size(array(:))

    do i=2,ia
       if (array(i) < array(i-1)) then
          unit = stdout() 
          write (unit,*) '=> Error: "frac_index" array must be monotonically increasing when searching for nearest value to ',&
                              value
          write (unit,*) '          array(i) < array(i-1) for i=',i 
          write (unit,*) '          array(i) for i=1..ia follows:'
          do ii=1,ia
             write (unit,*) 'i=',ii, ' array(i)=',array(ii)
          enddo
          call mpp_error(FATAL,' "frac_index" array must be monotonically increasing.')
       endif
    enddo
    if (value < array(1) .or. value > array(ia)) then
!       if (value < array(1))  frac_index = 1.
!       if (value > array(ia)) frac_index = float(ia)
        frac_index = -1.0
    else
       i=1
       keep_going = .true.
       do while (i <= ia .and. keep_going)
          i = i+1
          if (value <= array(i)) then
             frac_index = float(i-1) + (value-array(i-1))/(array(i)-array(i-1)) 
             keep_going = .false.
          endif
       enddo
    endif
  end function frac_index

  function nearest_index (value, array)
    !=======================================================================
    !
    !     nearest_index = index of nearest data point within "array" corresponding to
    !            "value".
    !
    !     inputs:
    !
    !     value  = arbitrary data...same units as elements in "array"
    !     array  = array of data points  (must be monotonically increasing)
    !     ia     = dimension of "array"
    !
    !     output:
    !
    !     nearest_index =  index of nearest data point to "value"
    !             if "value" is outside the domain of "array" then nearest_index = 1
    !             or "ia" depending on whether array(1) or array(ia) is
    !             closest to "value"
    !
    !             note: if "array" is dimensioned array(0:ia) in the calling
    !                   program, then the returned index should be reduced
    !                   by one to account for the zero base.
    !
    !     example:
    !
    !     let model depths be defined by the following:
    !     parameter (km=5)
    !     dimension z(km)
    !     data z /5.0, 10.0, 50.0, 100.0, 250.0/
    !
    !     k1 = nearest_index (12.5, z, km)
    !     k2 = nearest_index (0.0, z, km)
    !
    !     k1 would be set to 2, and k2 would be set to 1 so that
    !     z(k1) would be the nearest data point to 12.5 and z(k2) would
    !     be the nearest data point to 0.0
    !
    !=======================================================================

    integer :: nearest_index, ia, i, ii, unit
    real :: value
    real, dimension(:) :: array
    logical keep_going

    ia = size(array(:))

    do i=2,ia
       if (array(i) < array(i-1)) then
          unit = stdout()
          write (unit,*) '=> Error: "nearest_index" array must be monotonically increasing &
                         &when searching for nearest value to ',value
          write (unit,*) '          array(i) < array(i-1) for i=',i 
          write (unit,*) '          array(i) for i=1..ia follows:'
          do ii=1,ia
             write (unit,*) 'i=',ii, ' array(i)=',array(ii)
          enddo
          call mpp_error(FATAL,' "nearest_index" array must be monotonically increasing.')
       endif
    enddo
    if (value < array(1) .or. value > array(ia)) then
       if (value < array(1))  nearest_index = 1
       if (value > array(ia)) nearest_index = ia
    else
       i=1
       keep_going = .true.
       do while (i <= ia .and. keep_going)
          i = i+1
          if (value <= array(i)) then
             nearest_index = i
             if (array(i)-value > value-array(i-1)) nearest_index = i-1
             keep_going = .false.
          endif
       enddo
    endif
  end function nearest_index

  !#############################################################################

  subroutine interp_1d_linear(grid1,grid2,data1,data2)  

    real, dimension(:),    intent(in) :: grid1, data1, grid2
    real, dimension(:), intent(inout) :: data2

    integer :: n1, n2, i, n, ext
    real :: w

    n1 = size(grid1(:))
    n2 = size(grid2(:))


    do i=2,n1
       if (grid1(i) <= grid1(i-1)) call mpp_error(FATAL, 'grid1 not monotonic')
    enddo

    do i=2,n2
       if (grid2(i) <= grid2(i-1)) call mpp_error(FATAL, 'grid2 not monotonic')
    enddo

    if (grid1(1) > grid2(1) ) call mpp_error(FATAL, 'grid2 lies outside grid1')
    if (grid1(n1) < grid2(n2) ) call mpp_error(FATAL, 'grid2 lies outside grid1')

    do i=1,n2
       n = nearest_index(grid2(i),grid1)

       if (grid1(n) < grid2(i)) then
          w = (grid2(i)-grid1(n))/(grid1(n+1)-grid1(n))
          data2(i) = (1.-w)*data1(n) + w*data1(n+1)
       else
          if(n==1) then
             data2(i) = data1(n)
          else
             w = (grid2(i)-grid1(n-1))/(grid1(n)-grid1(n-1))
             data2(i) = (1.-w)*data1(n-1) + w*data1(n)   
          endif     
       endif
    enddo


    return

  end subroutine interp_1d_linear

  !###################################################################
  subroutine interp_1d_cubic_spline(grid1, grid2, data1, data2, yp1, ypn)  

    real, dimension(:),    intent(in) :: grid1, grid2, data1
    real, dimension(:), intent(inout) :: data2
    real,                  intent(in) :: yp1, ypn

    real, dimension(size(grid1))      :: y2, u
    real                              :: sig, p, qn, un, h, a ,b
    integer                           :: n, m, i, k, klo, khi

    n = size(grid1(:))
    m = size(grid2(:))    

    do i=2,n
       if (grid1(i) <= grid1(i-1)) call mpp_error(FATAL, 'grid1 not monotonic')
    enddo

    do i=2,m
       if (grid2(i) <= grid2(i-1)) call mpp_error(FATAL, 'grid2 not monotonic')
    enddo

    if (grid1(1) > grid2(1) ) call mpp_error(FATAL, 'grid2 lies outside grid1')
    if (grid1(n) < grid2(m) ) call mpp_error(FATAL, 'grid2 lies outside grid1')

    if (yp1 >.99e30) then
       y2(1)=0.
       u(1)=0.
    else
       y2(1)=-0.5
       u(1)=(3./(grid1(2)-grid1(1)))*((data1(2)-data1(1))/(grid1(2)-grid1(1))-yp1)
    endif

    do i=2,n-1
       sig=(grid1(i)-grid1(i-1))/(grid1(i+1)-grid1(i-1))
       p=sig*y2(i-1)+2.
       y2(i)=(sig-1.)/p
       u(i)=(6.*((data1(i+1)-data1(i))/(grid1(i+1)-grid1(i))-(data1(i)-data1(i-1)) &
             /(grid1(i)-grid1(i-1)))/(grid1(i+1)-grid1(i-1))-sig*u(i-1))/p
    enddo

    if (ypn > .99e30) then
       qn=0.
       un=0.
    else
       qn=0.5
       un=(3./(grid1(n)-grid1(n-1)))*(ypn-(data1(n)-data1(n-1))/(grid1(n)-grid1(n-1)))
    endif

    y2(n)=(un-qn*u(n-1))/(qn*y2(n-1)+1.)

    do  k=n-1,1,-1
       y2(k)=y2(k)*y2(k+1)+u(k)
    enddo

    do k = 1, m
       n = nearest_index(grid2(k),grid1)
       if (grid1(n) < grid2(k)) then
          klo = n
       else
          if(n==1) then
            klo = n
          else 
            klo = n -1
          endif
       endif
       khi = klo+1
       h   = grid1(khi)-grid1(klo)
       a   = (grid1(khi) - grid2(k))/h
       b   = (grid2(k) - grid1(klo))/h
       data2(k) = a*data1(klo) + b*data1(khi)+ ((a**3-a)*y2(klo) + (b**3-b)*y2(khi))*(h**2)/6
    enddo

  end subroutine interp_1d_cubic_spline

  !###################################################################

  subroutine interp_1d_1d(grid1,grid2,data1,data2, method, yp1, yp2)  

    real, dimension(:),      intent(in)    :: grid1, data1, grid2
    real, dimension(:),      intent(inout) :: data2
    character(len=*), optional, intent(in) :: method
    real,             optional, intent(in) :: yp1, yp2

    real              :: y1, y2
    character(len=32) :: interp_method    
    integer           :: k2, ks, ke

    k2 = size(grid2(:))

    interp_method = "linear"
    if(present(method)) interp_method = method
    y1 = 1.0e30
    if(present(yp1)) y1 = yp1
    y2 = 1.0e30
    if(present(yp2)) y2 = yp2
    call find_index(grid1, grid2(1), grid2(k2), ks, ke)
    select case(trim(interp_method))
    case("linear")
       call interp_1d_linear(grid1(ks:ke),grid2,data1(ks:ke),data2)
    case("cubic_spline")
       call interp_1d_cubic_spline(grid1(ks:ke),grid2,data1(ks:ke),data2, y1, y2)
    case default
       call mpp_error(FATAL,"axis_utils: interp_method should be linear or cubic_spline")
    end select

    return

  end subroutine interp_1d_1d

  !###################################################################


  subroutine interp_1d_2d(grid1,grid2,data1,data2)  

    real, dimension(:,:),    intent(in) :: grid1, data1, grid2
    real, dimension(:,:), intent(inout) :: data2

    integer :: n1, n2, i, n, k2, ks, ke
    real :: w

    n1 = size(grid1,1)
    n2 = size(grid2,1)
    k2 = size(grid2,2)

    if (n1 /= n2) call mpp_error(FATAL,'grid size mismatch')

    do n=1,n1
       call find_index(grid1(n,:), grid2(n,1), grid2(n,k2), ks, ke)
       call interp_1d_linear(grid1(n,ks:ke),grid2(n,:),data1(n,ks:ke),data2(n,:))
    enddo

    return

  end subroutine interp_1d_2d

  !###################################################################

  subroutine interp_1d_3d(grid1,grid2,data1,data2, method, yp1, yp2)  

    real, dimension(:,:,:),  intent(in)    :: grid1, data1, grid2
    real, dimension(:,:,:),  intent(inout) :: data2
    character(len=*), optional, intent(in) :: method
    real,             optional, intent(in) :: yp1, yp2

    integer           :: n1, n2, m1, m2, k2, i, n, m
    real              :: w, y1, y2
    character(len=32) :: interp_method
    integer           :: ks, ke
    n1 = size(grid1,1)
    n2 = size(grid2,1)
    m1 = size(grid1,2)
    m2 = size(grid2,2)
    k2 = size(grid2,3)

    interp_method = "linear"
    if(present(method)) interp_method = method
    y1 = 1.0e30
    if(present(yp1)) y1 = yp1
    y2 = 1.0e30
    if(present(yp2)) y2 = yp2

    if (n1 /= n2 .or. m1 /= m2) call mpp_error(FATAL,'grid size mismatch')

    select case(trim(interp_method))
    case("linear")
       do m=1,m1
          do n=1,n1
            call find_index(grid1(n,m,:), grid2(n,m,1), grid2(n,m,k2), ks, ke)
             call interp_1d_linear(grid1(n,m,ks:ke),grid2(n,m,:),data1(n,m,ks:ke),data2(n,m,:))
          enddo
       enddo
    case("cubic_spline")
       do m=1,m1
          do n=1,n1
            call find_index(grid1(n,m,:), grid2(n,m,1), grid2(n,m,k2), ks, ke)
            call interp_1d_cubic_spline(grid1(n,m,ks:ke),grid2(n,m,:), data1(n,m,ks:ke),data2(n,m,:), y1, y2)
          enddo
       enddo
    case default
       call mpp_error(FATAL,"axis_utils: interp_method should be linear or cubic_spline")
    end select

    return

  end subroutine interp_1d_3d


  !#####################################################################
  subroutine find_index(grid1, xs, xe, ks, ke)
    real, dimension(:), intent(in) :: grid1
    real,               intent(in) :: xs, xe
    integer,           intent(out) :: ks, ke

    integer :: k, nk

    nk = size(grid1(:))

    ks = 0; ke = 0
    do k = 1, nk-1
       if(grid1(k) <= xs .and. grid1(k+1) > xs ) then
          ks = k
          exit
       endif
    enddo
    do k = nk, 2, -1
       if(grid1(k) >= xe .and. grid1(k-1) < xe ) then
          ke = k
          exit
       endif
    enddo

    if(ks == 0 ) call mpp_error(FATAL,' xs locate outside of grid1')
    if(ke == 0 ) call mpp_error(FATAL,' xe locate outside of grid1')

  end subroutine find_index

end module axis_utils_mod

#ifdef test_axis_utils

program test

use fms_mod,       only : fms_init, file_exist, open_namelist_file, check_nml_error
use fms_mod,       only : close_file
use mpp_mod,       only : mpp_error, FATAL, stdout
use mpp_mod,       only : input_nml_file
use axis_utils_mod, only: interp_1d

implicit none



integer, parameter :: maxsize = 100

integer :: n_src = 0
integer :: n_dst = 0
real, dimension(MAXSIZE) :: grid_src = 0 
real, dimension(MAXSIZE) :: grid_dst = 0
real, dimension(MAXSIZE) :: data_src = 0

namelist / test_axis_utils_nml / n_src, n_dst, grid_src, grid_dst, data_src

real, allocatable :: data_dst(:)
integer           :: unit, ierr, io

  call fms_init()

  !--- default option of data
  n_src = 31
  n_dst = 40
  grid_src(1:n_src) = (/ -63.6711465476916, -63.6711455476916, 166.564180735096, 401.25299580552, &
                         641.056493022762, 886.219516665347, 1137.35352761133, 1394.4936854079,   &
                         1657.17893448689, 1925.64572676068, 2200.13183483549, 2480.9124139255,   &
                         2768.35396680912, 3062.86513953019, 3675.47369643284, 4325.10564183322,  &
                         5020.19039479527, 5769.85432323481, 6584.25101514851, 7475.94655633703,  &
                         8462.01951335773, 9568.28246037887, 10178.3869413515, 10834.1425668942,  &
                         11543.5265942777, 12317.3907407535, 13170.4562394288, 14125.6466646843,  &
                         15225.8720618086, 16554.7859690842, 19697.1334102613   /)
  grid_dst(1:n_dst) = (/ 1002.9522552602, 1077.51144617887, 1163.37842788755, 1264.19848463606,  &
                         1382.57557953916, 1521.56713587855, 1684.76300370633, 1876.37817787584, &
                         2101.36166220498, 2365.52429149707, 2675.68881278444, 3039.86610206727, &
                         3467.4620678435, 3969.52058529847, 4553.81573511231, 5159.54844211827,  &
                         5765.28114912423, 6371.01385613019, 6976.74656313614, 7582.4792701421,  &
                         8188.21197714806, 8793.94468415402, 9399.67739115997, 10005.4100981659, &
                         10611.1428051719, 11216.8755121778, 11822.6082191838, 12428.3409261898, &
                         13034.0736331957, 13639.8063402017, 14245.5390472076, 14851.2717542136, &
                         15457.0044612196, 16062.7371682255, 16668.4698752315, 17274.2025822374, &
                         17879.9352892434, 18485.6679962493, 19091.4007032553, 19697.1334102613 /)
  data_src(1:n_src) = (/ 309.895999643929, 309.991081541887, 309.971074746584, 310.873654697145, &
                         311.946530606618, 312.862249229647, 314.821236806913, 315.001269608758, &
                         315.092410930288, 315.19010999336,  315.122964496815, 315.057882573487, &
                         314.998796850493, 314.984586411292, 315.782246062002, 318.142544345795, &
                         321.553905292867, 325.247730854554, 329.151282227113, 332.835673638378, &
                         336.810414210932, 341.64530983048,  344.155248759994, 346.650476976385, &
                         349.106430095269, 351.915323032738, 354.709396583792, 359.68904432446,  &
                         371.054289820675, 395.098187506342, 446.150726850039 /)


  !---reading namelist 
#ifdef INTERNAL_FILE_NML
      read (input_nml_file, test_axis_utils_nml, iostat=io)
#else
  if(file_exist('input.nml')) then
    unit =  open_namelist_file()
       ierr=1
    do while (ierr /= 0)
          read  (unit, nml=test_axis_utils_nml, iostat=io, end=10)
          ierr = check_nml_error(io,'test_axis_utils_nml')  ! also initializes nml error codes
    enddo
 10    call close_file(unit)
  endif
#endif

  if(n_src >MAXSIZE) call mpp_error(FATAL, 'test_axis_utils: nml n_src is greater than MAXSIZE')
  if(n_dst >MAXSIZE) call mpp_error(FATAL, 'test_axis_utils: nml n_dst is greater than MAXSIZE')

  allocate(data_dst(n_dst) )



  !--- write out data
  unit = stdout()
  write(unit,*)' the source grid is ', grid_src(1:n_src)
  write(unit,*)' the destination grid is ', grid_dst(1:n_dst)
  write(unit,*)' the source data is ', data_src(1:n_src)
  call interp_1d(grid_src(1:n_src), grid_dst(1:n_dst), data_src(1:n_src), data_dst, "linear")
  write(unit,*)' the destination data using linear interpolation is ', data_dst(1:n_dst)
  call interp_1d(grid_src(1:n_src), grid_dst(1:n_dst), data_src(1:n_src), data_dst, "cubic_spline")
  write(unit,*)' the destination data using cublic spline interpolation is ', data_dst(1:n_dst)

end program test


#endif /* test_axis_utils */